History of Computer Controlled Engine Management
Before the advent of computer controlled engine management systems, the source of many auto malfunctions was something you could see. Pop off the distributor cap and you could see burned or closed points, carbon tracks that would cause a misfire or a cracked cap or cracked rotor. You could look down the throat of the carburetor and observe the fuel flow and atomization. A simple compression test revealed a lot of information about the mechanical condition of the motor. Altogether there were not many parts involved in the operating system of the engine; just a distributor, spark plugs, ignition cables and a carburetor. Beginning in the late 1970s in order to meet federal emission and fuel economy standards manufacturers began to add electronic controls and sensors to the fuel and ignition systems. In 30 years electronic controls have evolved and expanded exponentially. Now electronic management is thoroughly integrated into most systems. Engine controls, transmission controls, anti lock brakes, traction control, air bags, automatic climate control and collision avoidance systems are present in today’s vehicles and the number of sensors and operating devices number in the hundreds.
When there is a malfunction in any of these systems, a warning light will illuminate. The computer that regulates the system can narrow down the source of the malfunction by setting a code which identifies the area or circuit the problem exists in, but rarely does it identify the exact cause. We often have vehicle owners come in who have gone to a parts store for a free diagnosis, bought and installed a certain part and still have the same malfunction. Retrieving the code from the computer is only the beginning of the process. The next steps are to test the appropriate output signals from sensors, test the incoming signals to the operating devices and test to see if the operating devices are performing the correct function when activated. This thorough type of diagnostic procedure is what results in repairing the problem right the first time.
Know What Your Warning Lights Mean!
Check Engine Light or Engine Symbol: A malfunction in the engine management system, usually emissions related. If the light flashes the car should not be driven because damage could result.
ABS or Anti-lock: Usually means there is a problem in the anti-lock portion of the braking system. The brakes should continue to work but the skid-preventing function may not operate.
SRS, Airbag or Airbag Symbol: The airbags may not deploy in an accident. In rare instances it could indicate a short that could cause an airbag to deploy without warning. This condition should always be investigated by a repair facility.
The Basics Behind Engine Diagnostics Services at Rob’s Auto & Diesel Repair
The OBD System, or On-Board Diagnostics System, was originally installed to monitor vehicle emissions, but it also detects problems within the engine. Both OBD I and OBD II systems exist, with OBD II systems becoming the standard in vehicles manufactured after 1996. The OBD is connected to the engine control unit (ECU), which helps your engine run efficiently while keeping emissions low. The OBD can identify and warn the driver of engine malfunction by sending error notifications to the ECU system. The ECU is in charge of several engine processes, including the mixture of air and fuel, emissions, and engine timing. The ECU uses sensors to monitor them or make adjustments. If the ECU detects malfunctions, it triggers the “check engine” light on the dashboard. The OBD system then records the code pertaining to the problem. The code can be accessed by a trained technician through engine diagnostic equipment in order to properly diagnose the issue.
Why Should You Have Engine Diagnostics Services Performed at Rob’s Auto & Diesel Repair
Engine diagnostics serve to keep your engine running efficiently. The OBD system is capable of detecting malfunctions before they lower engine performance or cause severe damage. Because of the mandatory OBD system, your automobile is capable of monitoring and diagnosing its own performance. You should have engine diagnostics performed when the “check engine” light comes on. Engine diagnostics will help detect problems early so that minor problems never become major problems. Engine diagnostics also help keep emissions low, and if your engine is malfunctioning, your vehicle might not pass an emissions test. When your “check engine” light turns on, it is time for you to contact us for an engine diagnostics service. Our experienced staff will work hard to get your engine working again properly in no time.
We proudly service the Engine Diagnostics needs of customers in Williamston, NC and surrounding areas.